How to Set Static IP Address to Router for ALL Devices?

Do you want to set a static IP address? If you are in a wireless router network then you have different multiple IP addresses for all of your devices connected to the network.

Normally, if you have the DHCP server then whenever you reboot your devices or the router then the IP address gets changed every time.

No matter whatever router you use all of those are having set up of static IP address.

In this content, we will share with you the guide on how you can set the static IP address to any devices keeping the same DNS address.

Actually, DNS servers can get you identified through this static IP address. So if you are using static IP address, it is easier for the ISP to find you through the DNS...

...static IP address is always better than any other servers as this get data from the host servers easily and quickly.

Note: If you want to change the IP address, check this out here.

If you are setting up an internet connection through static IP setup then you may ask how do I find the static IP address?

Remember that static IP, provided by ISP does not change automatically. You can get it at an additional if your ISP has that feature.

Dynamic IP vs Static IP

Both of these types can be private or public. Dynamic IP is changeable whereas the static IP is dedicated to each user. Let's explain deeper about this:
  • This is the most common question that how dynamic IP address works! Dynamic IP address works through DHCP protocol.
  • Static IP is set to never change while the dynamic IP will be changed to a new one every time you reboot the router.
The dynamic IP address is dedicated automatically by the host server but static IP is manual.

Once the static IP is set, it will remain as like that. The dynamic IP address is cheaper while the static IP is a little costly.

What is Static IP Address?

There are many causes which lead us to change the IP address frequently. For a quick look we have listed these below:
If you need to change the router or shifted to new ISP then you have to set up a new static IP address.

Static IP is the IP address provided by the ISP to browse the internet. This static IP identifies a particular user to the ISP.

The static IP should be different for all users for every internet service provider. The provided static IP address is completely free and particularly assigned to you.

How to Assign a Static IP Address to Router?

If you need to setup static IP for your router then you can do this easily by going into router setup terminal.

Just note that you can perform this operation in any router whether it is Netgear or Linksys, the process is the same for all.

The process is very simple, you just have to select the static IP from the setup option and need to input the IP values (provided by your ISP) on the static IP form along with DNS server details.

You may need to change your IP address on your router in three main conditions.

i) If you have got a new router and want to set the IP on it.

ii) If you have moved your DHCP server connection to Static IP connection.

iii) If you got a new static IP from your ISP to set on your router.

The process is really quick. Before doing this just keep your static IP address and other details ready and then just follow the guide below to do this step-by-step:

1. At first, save the IP details and reset your router to clear up all of the previous set up.
2. Now, go to the wireless setup on your router to configure the new static IP on it.
3. Then, just enter all of the IPs provided by your ISP (i. e. gateway IP, new static IP, DNS and Subnet Mask).

change ip router
Once you complete these settings, just reboot your router to get the new IP reflected on that device.

How to Find the Router Login page URL?

If you are already connected to a router that is using DHCP server for dynamic setup then you can shift the setup to static IP.

Now to go to the router setup page and change the settings to static IP you need the router login page URL that you can get by a CMD command on your PC.

Just open your CMD and type: ipconfig

ipconfig_find router IP

Here your router login URL shows as: 'Default Gateway....:'

Now you have got the IP address of your router homepage. Just type it on your URL bar on PC then login with username and password and go to the router static IP settings.

How to Set a Static IP Address on Computer?

You can set or change the static IP address on your computer either it is running Windows 10, 8, 7. If your ISP has given you a new static IP to set up then just follow the steps below:

Go to 'Network and Sharing Center' which you will find in Control Panel or you can simply click on Internet Connection icon which is displayed at the right corner in the bottom.

After that, you will see the connected network. Just click on it. Then click on 'Properties'.

change static ip pc

Here you will see IPv4 setup, is shown as 'Internet Protocol Version 4 (TCP/IPv4)'. Just double-click on it to add the new IP.

Here you will find the box. Just enter the gateway IP and your static IP address correctly to get connected. Then press the OK button.

change ip windows

Once you complete this. The new public static IP will take effect instantly.

How to Change Wireless Network Static IP on PC?

Changing Static IP on your Windows is almost the same as the public IP address. Just find the details of gateway IP, subnet mask, DNS then go for the setup.
  1. Just open the connected network (wired or wireless) and click on details to get the details.
    get private ip
  2. Then click on 'Properties' to open IPv4 setup.
  3. Now enter your Static Ip and default gateway and subnet mask. You can enter Google DNS into the DNS field.
    change ip private_new
Now it's done.

Things to Remember:

  • If you are currently using dynamic IP setup and planning to shift to static IP setup then you remember that this will not increase your internet speed by this change.
  • Static IP setup is always better than DHCP setup because the static IP set to not change whereas the dynamic IP always change its IP address.
  • Remember that ISP tracks its user by the static IP address through the DNS that is why static IP is safer than using a dynamic IP.
  • If your device is connected to a router and if you change the static IP address of your device then you may face IP conflicts on your device or your device may not work properly. That is why, it is recommended when you are changing the static IP of a device (connected to the router), just reboot your router after the change.
  • Normally whenever you buy a static IP from your ISP your DNS server stays the same however you can use the Google DNS to avoid any type of tracking.
  • You should know that whenever you are setting a static IP address to your device, you cannot set the same to another connected device on the same network.

Android,5,Animation,1,Block/Unblock,2,Cloud,2,Earn,2,Facebook,18,Gmail,2,Google,1,How To,63,iMessage,1,Instagram,12,Internet,7,IP,2,iPhone,5,MAC,1,PDF,4,Recovery,1,Routers,9,Skype,1,Smartphone,1,Snapchat,4,Social,8,Software & Apps,6,Virus,2,VPN,2,WhatsApp,24,Windows,9,YouTube,2,
Techniquehow.Com: How to Set Static IP Address to Router for ALL Devices?
How to Set Static IP Address to Router for ALL Devices?
Loaded All Posts Not found any posts VIEW ALL Readmore Reply Cancel reply Delete By Home PAGES POSTS View All RECOMMENDED FOR YOU LABEL ARCHIVE SEARCH ALL POSTS Not found any post match with your request Back Home Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sun Mon Tue Wed Thu Fri Sat January February March April May June July August September October November December Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec just now 1 minute ago $$1$$ minutes ago 1 hour ago $$1$$ hours ago Yesterday $$1$$ days ago $$1$$ weeks ago more than 5 weeks ago Followers Follow THIS CONTENT IS PREMIUM Please share to unlock Copy All Code Select All Code All codes were copied to your clipboard Can not copy the codes / texts, please press [CTRL]+[C] (or CMD+C with Mac) to copy